Certainly! Here's a more detailed step-by-step guide to install the stock ROM on your Redmi Note 6 Pro using the Mi Flash Tool:
Prerequisites:
1. Download Stock ROM:
- Visit the official Xiaomi website or the Download from below link.
- Download the official stock ROM for your Redmi Note 6.
2. Charge Your Device:
- Ensure that your Redmi Note 6 has sufficient battery to prevent any interruptions during the installation process.
3. **Backup Your Data:**
- Perform a thorough backup of your important data, as the installation process will erase all data on your device.
Steps to Install Stock ROM:
1. Unlock Bootloader (if not already unlocked):
- Xiaomi devices typically require an unlocked bootloader for ROM installations.
- Visit the official Xiaomi website or forums for instructions on unlocking the bootloader.
2. Install Mi Flash Tool on Your Computer:
- Download the Mi Flash Tool from the official Xiaomi website.
- Install the Mi Flash Tool on your computer.
3. Boot your Redmi Note 6 into Fastboot Mode:
- Turn off your Redmi Note 6.
- Press and hold the Power button + Volume Down button simultaneously until the Fastboot logo appears.
4. Connect Your Device to the Computer:
- Use a USB cable to connect your Redmi Note 6 to your computer while it's in Fastboot mode.
How to root android phone without PC
5. Launch Mi Flash Tool on Your Computer:
- Open the Mi Flash Tool on your computer. You may need to run it as an administrator.
6. Load Stock ROM in Mi Flash Tool:
- In the Mi Flash Tool, click on the "Select" button.
- Browse to the location where you downloaded the stock ROM and select the ROM file.
- Click on the "Refresh" button to make sure that your device is detected.
7. Configure Mi Flash Tool:
- Choose the flashing option you prefer (usually "Clean all" for a clean installation).
- Click on the "Flash" button to start the flashing process.
8. Wait for Flashing to Complete:
- Allow the Mi Flash Tool to complete the flashing process. This may take a few minutes.
9. Reboot Your Device:
- Once the flashing is successful, disconnect your Redmi Note 6 from the computer.
- Manually reboot your device by holding down the Power button.
10. Set Up Your Device:
- Your Redmi Note 6 should now boot into the newly installed stock ROM.
- Follow the on-screen instructions to set up your device.
Your Redmi Note 6 should now be running the stock ROM.